Three Roll Variable Axis

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

This is a machine model available with pre bending facility and most useful for small and medium fabrication workshop.

Advantages

 

• Specially developed hydraulic circuit.
• As the bottom roll axis distance can be varied from minimum to maximum. It covers a wide range of material thickness for pre bending / rolling depending on diameter to be rolled.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Since all roll movement and roll rotation is through hydrualic actuator, only one person is required for operating the machine without efforts.

Special FeaturesHydrualically operated tilt able top roll for easy rolled shell removal.

All our machine rolls are mounted in heavy duty roller bearings.

Each roller is fitted with two bearing per side (four bearing per roller).

In this type of model, all hydrualic actuators are operated by solenoide control valves.

The side roll up-down position and bottom roll in-out position is indicated by digital meter provided on control desk.

Due to special type of working principle geometry, the minimum diameter that can be rolled is much smaller campared to three roll and four roll planetary axis type machine for the full length and thickness of given material.

Because of the top roll up-down movement, it can work as a press machine which enables to pre bend and roll conical components to the full machine capacity.

A seprate cone bending attachment can be provided for narrow diameter cone forming.

The rolls are positively driven by planetary gear box and hydraulic motor mounted inline with roller axis.

Standard Featues

• All rolls manufactured from alloy steel material
• The top roll is positively driven by inline mounted planetary gear box and hydraulic motor.
• Both the ends of top and side rolls can be tilted to a desired angle for conical bending.

Optional Featues

• A special alloy steel material for Hardened rolls. Hardness up to 52-60 RC
• All 3 rolls can be positively driven.
• A seprate cone bending attachment can be provided for narrow diameter cone forming.
• Overhead support
• Lateral support
• Tilt able top roll
• Automatic roll speed compensation

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

This is low cost machine model available with pre bending facility and most useful for small and medium fabrication workshop.

Advantages

 

• Specially developed hydraulic circuit requiring minimum maintenance.
• As the bottom roll axis distance can be varied from minimum to maximum. It covers a wide range of material thickness for pre bending / rolling depending on diameter to be rolled.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Since all roll movement and roll rotation is through hydrualic actuator, only one person is required for operating the machine without efforts.

Special Features

Hydraulically operated tilt able top roll for easy rolled shell removal.

All our machine rolls are mounted in heavy duty roller bearings.

Each roller is fitted with two bearing per side (four bearing per roller).

In this type of model, all hydrualic actuators movement are through manually operated mobile control walves.

The side roll up-down position is indicated by digital meter provided on control desk.

Due to special type of working principle geometry, the minimum diameter that can be rolled is much smaller campared to three roll and four roll planetary axis type machine for the full length and thickness of given material.

Because of the top roll up-down movement, it can work as a press machine which enables to pre bend and roll conical components to the full machine capacity.

A seprate cone bending attachment can be provided for narrow diameter cone forming.

The rolls are positively driven by planetary gear box and hydraulic motor mounted inline with roller axis.

Standard Featues

• All rolls manufactured from alloy steel material
• The top roll is positively driven by inline mounted planetary gear box and hydraulic motor.
• Both the ends of top and side rolls can be tilted to a desired angle for conical bending.

Optional Featues

• A special alloy steel material for Hardened rolls. Hardness up to 52-60 RC
• All 3 rolls can be positively driven.
• A seprate cone bending attachment can be provided for narrow diameter cone forming.
• Overhead support
• Lateral support
• Tilt able top roll
• Automatic roll speed compensation

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

This is a machine model available with pre bending facility and most useful for one of / repetitive type of medium and heavy components.

Advantages

 

• Specially developed hydraulic circuit requiring minimum maintenance.
• As the bottom roll axis distance can be varied from minimum to maximum. It covers a wide range of material thickness for pre bending / rolling depending on diameter to be rolled.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Specially developed hydraulic circuit to achieve side roll positional accuracy within +-0.2 mm
• Since all roll movement and roll rotation is through hydrualic actuator, only one person is required for operating the machine without efforts.

Special FeaturesHydrualically operated tilt able top roll for easy rolled shell removal.

All our machine rolls are mounted in heavy duty roller bearings.

Each roller is fitted with two bearing per side (four bearing per roller).

In this type of model, all hydrualic actuators are operated by solenoide and elctro-propotional hydraulic control valves.

This machine uses PLC and HMI for automated pre decided machine operation sequence and set parameter achievement.

 

All set parameters are displayed on HMI while the machine is in running mode.

Due to special type of working principle geometry, the minimum diameter that can be rolled is much smaller campared to three roll and four roll planetary axis type machine for the full length and thickness of given material.

Because of the top roll up-down movement, it can work as a press machine which enables to pre bend and roll conical components to the full machine capacity.

 

A seprate cone bending attachment can be provided for narrow diameter cone forming.

The rolls are positively driven by planetary gear box and hydraulic motor mounted inline with roller axis.

Standard Featues

 

• All rolls manufactured from alloy steel material
• The top roll is positively driven by inline mounted planetary gear box and hydraulic motor.
• Both the ends of top and side rolls can be tilted to a desired angle for conical bending.

Optional Featues

• A special alloy steel material for Hardened rolls. Hardness up to 52-60 RC
• All 3 rolls can be positively driven.
• A seprate cone bending attachment can be provided for narrow diameter cone forming.
• Overhead support
• Lateral support
• Tilt able top roll
• Automatic roll speed compensation