Three Roll Planetary Axis

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The pre bending / edge bending and rolling can be performed in the same machine.

Advantages

 

• The machine can be operated remotely from all around.
• Since all roll movement and roll rotation is through completely numerically controlled hence skilled manpower is not required.
• Specially developed hydraulic circuit to achieve side roll positional accuracy within +-0.2 mm
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.

Special Features

Hydrualically operated tilt able top roll for easy rolled shell removal.

All our machine rolls are mounted in heavy duty roller bearings.

Each roller is fitted with two bearing per side (four bearing per roller).

In this type of model, all hydrualic actuators are operated by solenoide and elctro-propotional hydraulic control valves.

This machine uses PLC and HMI for automated pre decided machine operation sequence and set parameter achievement.

 

All set parameters are displayed on HMI while the machine is in running mode.

Since the machine in consideration has a planatory axis movement of pressure rolls the force applied to clamp / pinch the plate and also to form radiouse is much higher due to leverage available and can perform better compared to rectilinear guide type machine.

As a standard available feature for conical bending/rolling the side roll can be inclined to an angle.

 

A seprate cone bending attachment can be provided for narrow diameter cone forming.

The rolls are positively driven by planetary gear box and hydraulic motor mounted inline with roller axis.

Standard Featues

 

• All rolls manufactured from alloy steel material
• Both bottom rolls are positively driven by inline mounted planetary gear box and hydraulic motor.
• Possible to place side roll in inclined position for conical rolling

Optional Featues

• A special alloy steel material for Hardened rolls. Hardness up to 52-60 RC
• All 3 rolls can be positively driven.
• A seprate cone bending attachment can be provided for narrow diameter cone forming.
• Provision for section rolling
• Section bending dies
• Overhead support
• Lateral support
• Auto plate squaring reference stopper
• Tilt able top roll
• Automatic roll speed compensation

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The pre bending / edge bending and rolling can be performed in the same machine.

Advantages

 

• The machine can be operated remotely from all around.
• Specially developed hydraulic circuit requiring minimum maintenance.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Since all roll movement and roll rotation is through hydrualic actuator, only one person is required for operating the machine without efforts.

Special FeaturesHydrualically operated tilt able top roll for easy rolled shell removal.

All our machine rolls are mounted in heavy duty roller bearings.

Each roller is fitted with two bearing per side (four bearing per roller).

In this type of model, all hydrualic actuators are operated by solenoide and elctro-propotional hydraulic control valves.

This machine uses PLC and HMI for automated pre decided machine operation sequence and set parameter achievement.

 

All set parameters are displayed on HMI while the machine is in running mode.

Since the machine in consideration has a planatory axis movement of pressure rolls the force applied to clamp / pinch the plate and also to form radiouse is much higher due to leverage available and can perform better compared to rectilinear guide type machine.

As a standard available feature for conical bending/rolling the side roll can be inclined to an angle.

 

A seprate cone bending attachment can be provided for narrow diameter cone forming.

The rolls are positively driven by planetary gear box and hydraulic motor mounted inline with roller axis.

Standard Featues

 

• All rolls manufactured from alloy steel material
• Both the bottom rolls are positively driven by inline mounted planetary gear box and hydraulic motor.
• Possible to place side roll in inclined position for conical rolling

Optional Featues

• A special alloy steel material for Hardened rolls. Hardness up to 52-60 RC
• All 3 rolls can be positively driven.
• A seprate cone bending attachment can be provided for narrow diameter cone forming.
• Provision for section rolling
• Section bending dies
• Overhead support
• Lateral support
• Auto plate squaring reference stopper
• Tilt able top roll
• Automatic roll speed compensation

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

This is low cost machine model available with pre bending facility and most useful for small and medium fabrication workshop.

Advantages

 

• Specially developed hydraulic circuit requiring minimum maintenance.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Since all roll movement and roll rotation is through hydrualic actuator, only one person is required for operating the machine without efforts.

Special FeaturesHydrualically operated tiltable top roll for easy rolled shell removal.

All our machine rolls are mounted in heavy duty roller bearings.

Each roller is fitted with two bearing per side (four bearing per roller).

In this type of model, all hydrualic actuators movement are through manually operated mobile control walves.

The side roll up-down position is indicated by digital meter provided on control desk

Since the machine in consideration has a planatory axis movement of pressure rolls the force applied to clamp / pinch the plate and also to form radiouse is much higher due to leverage available and can perform better compared to rectilinear guide type machine.

As a standard available feature for conical bending/rolling the side roll can be inclined to an angle.

 

A seprate cone bending attachment can be provided for narrow diameter cone forming.

The rolls are positively driven by planetary gear box and hydraulic motor mounted inline with roller axis.

Standard Featues

 

• All rolls manufactured from alloy steel material
• Both the bottom rolls are positively driven by inline mounted planetary gear box and hydraulic motor.
• Possible to place side roll in inclined position for conical rolling

Optional Featues

• A special alloy steel material for Hardened rolls. Hardness up to 52-60 RC
• All 3 rolls can be positively driven.
• A seprate cone bending attachment can be provided for narrow diameter cone forming.
• Provision for section rolling
• Section bending dies
• Overhead support
• Lateral support
• Auto plate squaring reference stopper
• Tilt able top roll
• Automatic roll speed compensation