Three Roll Linear Axis

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The machine is most economical model among all plate bending machine and is most useful for small fabrication shop.

Advantages

 

• Specially developed low cost economical manual operated machine with motorised roll rotation, a perfect machine for engineering work shop.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Small engineering workshop willing to invest less still automate rolling.
• Open type rolling requiring mass production qty.
• This machine can be used where different operations like pre bending, rolling, material straightening ,Conical rolling, section rolling need to be carried out in single machine.

Special Features

The machine frame is built from all tested steel plate material.

This frame is subjected to stress releaving, sand blasting and epoxy primer painted for corrosion free long lasting machine life.

The complete body is machined in cnc machine to achieve built in accuracy.

A tiltable control desk is conveniently located on machine.

 

The main panel start / stop buttons and roll rotation fucntion (Reverse / forward) is provided on the same desk.

A specially desinged & built mechanism allows drop end frame to tilt down in horizontal position without much efforts (one person can perform job).

No need to dismantle frame from main body like in conventional machine.

 

The top roll can be tilted to great degree of inclination making it most convenient and ease to remove rolled shells without any difficulty.

The Top roll left side position and right side position are indicated seperatly by two digital meters.

All our machine rolls are mounted in heavy duty roller bearings.

 

Each roller is fitted with two bearing per side (four bearing per roller).

A dual cone bending device can be provided as shown.

The attachment provided between bottom rolls is suitable for narrow cone diameter.

 

The attachment to be fitted on a main frame is suitable for cone having wide angle.

An extra wide 'Y' type adjustable support rolls mounted in bearings provides best support to bottom rolls & eliminate scraches on top rolls.

An extented rolls can be provided for mounting dies to roll different sections like angle, channel, beam, pipe or flat etc.

Standard Featues

 

• Both the bottom rolls are driven rolls
• All rolls are manufactured in alloy steel material
• Separate digital roll position meter for each side of roll makes it easy to maintain parallelism between top and bottom roll
• Manually operated drop end frame tilting for ease of job removal

Optional Featues

• All 3 rolls positively driven for thin material rolling
• Hardened rolls up to 52-55 RC
• Tilt able top roll for ease of removal of duly rolled shells
• Cone bending arrangement between bottom rolls for smaller diameter cone rolling
• Extra heavy cone bending arrangement on frame for bigger diameter cone rolling
• Magnetic base electrical pendant for all around access to operator
• PLC controls for automatic bending and rolling
• Extended shaft for section rolling die mounting for rolling of section like angle, channel, beams, flats, pipes, bar etc.
• Sinking type reference plate for initial reference while feeding the plate inside the machine.
• Feeder table

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The machine is most economical model among all plate bending machine and is most useful for small fabrication shop.

Advantages

 

• Specially developed low cost economical manual operated machine with motorised roll rotation, a perfect machine for engineering work shop.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Small engineering workshop willing to invest less still automate rolling.
• Open type rolling requiring mass production qty.
• This machine can be used where different operations like pre bending, rolling, material straightening ,Conical rolling, section rolling need to be carried out in single machine.

Special Features

The machine frame is built from all tested steel plate material.

This frame is subjected to stress releaving, sand blasting and epoxy primer painted for corrosion free long lasting machine life.

The complete body is machined in cnc machine to achieve built in accuracy.

A tiltable control desk is conveniently located on machine.

 

The main panel start / stop buttons and roll rotation fucntion (Reverse / forward) is provided on the same desk.

A specially desinged & built mechanism allows drop end frame to tilt down in horizontal position without much efforts (one person can perform job).

No need to dismantle frame from main body like in conventional machine.

 

The top roll can be tilted to great degree of inclination making it most convenient and ease to remove rolled shells without any difficulty.

The Top roll left side position and right side position are indicated seperatly by two digital meters.

All our machine rolls are mounted in heavy duty roller bearings.

 

Each roller is fitted with two bearing per side (four bearing per roller).

A dual cone bending device can be provided as shown.

The attachment provided between bottom rolls is suitable for narrow cone diameter.

 

The attachment to be fitted on a main frame is suitable for cone having wide angle.

An extra wide 'Y' type adjustable support rolls mounted in bearings provides best support to bottom rolls & eliminate scraches on top rolls.

An extented rolls can be provided for mounting dies to roll different sections like angle, channel, beam, pipe or flat etc.

Standard Featues

 

• Both the bottom rolls are driven rolls
• All rolls are manufactured in alloy steel material
• Separate digital roll position meter for each side of roll makes it easy to maintain parallelism between top and bottom roll
• Manually operated drop end frame tilting for ease of job removal

Optional Featues

• All 3 rolls positively driven for thin material rolling
• Hardened rolls up to 52-55 RC
• Tilt able top roll for ease of removal of duly rolled shells
• Cone bending arrangement between bottom rolls for smaller diameter cone rolling
• Extra heavy cone bending arrangement on frame for bigger diameter cone rolling
• Magnetic base electrical pendant for all around access to operator
• PLC controls for automatic bending and rolling
• Extended shaft for section rolling die mounting for rolling of section like angle, channel, beams, flats, pipes, bar etc.
• Sinking type reference plate for initial reference while feeding the plate inside the machine.
• Feeder table