Three Roll Fix Axis

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

OVERVIEW

This is a fully electromechanical machine operated by motorised roll up-down movement and motorised roll rotation.

Advantages

 

• Specially developed low cost economical electromechanically operated machine with all functions like roll, up-down and roll rotation are fully automatic.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Small engineering workshop willing to invest less still automate rolling.
• Open type rolling requiring mass production qty.
• This machine can be used where different operations like pre bending, rolling, material straightening ,Conical rolling, section rolling need to be carried out in single machine.

Special Features

The machine frame is built from all tested steel plate material.

This frame is subjected to stress releaving, sand blasting and epoxy primer painted for corrosion free long lasting machine life.

The complete body is machined in cnc machine to achieve built in accuracy.

A tiltable control desk is conveniently located on machine.

 

The main panel start / stop buttons, top roll up-down movement and roll rotation fucntion (Reverse / forward) is provided on the same desk.

Manual pull type drop end housing holder can be conveniently dropped down and also a top roll can be tilted to a great degree of inclination for ease of rolled shelled removal. No need to dismantle frame from main body like in conventional machine.

The Top roll left side position and right side position are indicated seperatly by two digital meters.

All our machine rolls are mounted in heavy duty roller bearings.

 

Each roller is fitted with two bearing per side (four bearing per roller).

A dual cone bending device can be provided as shown.

The attachment provided between bottom rolls is suitable for narrow cone diameter. The attachment to be fitted on a main frame is suitable for cone having wide angle.

An extra wide 'Y' type adjustable support rolls mounted in bearings provides best support to bottom rolls & eliminate scraches on top rolls.

An extented rolls can be provided for mounting dies to roll different sections like angle, channel, beam, pipe or flat etc

Standard Featues

 

• The top roll up-down (Pressing) movement is fully automatic.
• Both the bottom rolls are driven rolls
• All rolls are manufactured in alloy steel material
• Separate digital roll position meter for each side of roll makes it easy to maintain parallelism between top and bottom roll
• Manually operated drop end housing holder for ease of job removal

Optional Featues

• All 3 rolls positively driven for thin material rolling
• Hardened rolls up to 52-55 RC
• Tilt able top roll for ease of removal of duly rolled shells
• Cone bending arrangement between bottom rolls for smaller diameter cone rolling
• Extra heavy cone bending arrangement on frame for bigger diameter cone rolling
• Magnetic base electrical pendant for all around access to operator
• PLC controls for automatic bending and rolling
• Extended shaft for section rolling die mounting for rolling of section like angle, channel, beams, flats, pipes, bar etc.
• Sinking type reference plate for initial reference while feeding the plate inside the machine.
• Feeder table

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The machine is most economical model which is a fully hydraulically operated machine. All funtions like top roll up-down, roll rotation (reverse / forward), drop end frame pulled down and top roll inclination is all by hydraulical actuators.

Advantages

 

• Since this is a full hydraulically operated machine only one person can perform all the functions with a push button / handliver actuation.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Small engineering workshop willing to invest less still automate rolling.

Special Features

The machine frame is built from all tested steel plate material.

This frame is subjected to stress releaving, sand blasting and epoxy primer painted for corrosion free long lasting machine life.

The complete body is machined in cnc machine to achieve built in accuracy.

A tiltable control desk is conveniently located on machine.

 

The main panel start / stop buttons, top roll up-down movement and roll rotation fucntion (Reverse / forward) along with drop end tilting and top roll tilt is provided on the same desk.

The drop end can be pulled down in horizontal position and a top roll is tilted in incline position for ease of rolled shell removal.

 

No need to dismantle frame from main body like in conventional machine.

The Top roll left side and right side position are indicated seperatly by two digital meters.

All our machine rolls are mounted in heavy duty roller bearings.

 

Each roller is fitted with two bearing per side (four bearing per roller).

A dual cone bending device can be provided as shown.

The attachment provided between bottom rolls is suitable for narrow cone diameter.

The attachment to be fitted on a main frame is suitable for cone having wide angle.

An extra wide 'Y' type adjustable support rolls mounted in bearings provides best support to bottom rolls & eliminate scraches on top rolls.

An extented rolls can be provided for mounting dies to roll different sections like angle, channel, beam, pipe or flat etc.

Standard Featues

• Both the bottom rolls are driven rolls
• All rolls are mounted on heavy duly ball bearing .Total 4 bearing per roller
• Fully hydraulically operated machine requires less input power compared to electro hydraulic
• Separate digital roll position meter for each side of roll makes it easy to maintain parallelism between top and bottom roll
• Extra heavy central support with bearing to resist point load on roller and for longer roller life
• Hydraulically operated drop end frame for ease of job removal
• A single person can operate the machine while rolling

Optional Featues

• Hardened rolls up to 52-55 RC
• Tilt able top roll for ease of removal 0of duly rolled shells
• Cone bending arrangement between bottom rolls for smaller diameter cone rolling
• Extra heavy cone bending arrangement on frame for bigger diameter cone rolling
• Electrical control panel with moving trolley for all around access to operator
• PLC controls for automatic bending and rolling
• All 3 rolls positively driven for thin material rolling
• Extended shaft for section rolling die mounting for rolling of section like angle, channel, beams, flats, pipes, bar etc.

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The machine is most economical model which is a fully hydraulically operated machine. All funtions like top roll up-down, roll rotation (reverse / forward), drop end frame pulled down and top roll inclination is all by hydraulical actuators.

Advantages

 

• Since this is a full hydraulically operated machine only one person can perform all the functions with a push button / handliver actuation.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Small engineering workshop willing to invest less still automate rolling.

Special Features

The machine frame is built from all tested steel plate material.

This frame is subjected to stress releaving, sand blasting and epoxy primer painted for corrosion free long lasting machine life.

The complete body is machined in cnc machine to achieve built in accuracy.

A tiltable control desk is conveniently located on machine.

 

The main panel start / stop buttons, top roll up-down movement and roll rotation fucntion (Reverse / forward) along with drop end tilting and top roll tilt is provided on the same desk.

The drop end can be pulled down in horizontal position and a top roll is tilted in incline position for ease of rolled shell removal.

 

No need to dismantle frame from main body like in conventional machine.

The Top roll left side and right side position are indicated seperatly by two digital meters.

All our machine rolls are mounted in heavy duty roller bearings.

 

Each roller is fitted with two bearing per side (four bearing per roller).

A dual cone bending device can be provided as shown.

The attachment provided between bottom rolls is suitable for narrow cone diameter.

 

The attachment to be fitted on a main frame is suitable for cone having wide angle.

An extra wide 'Y' type adjustable support rolls mounted in bearings provides best support to bottom rolls & eliminate scraches on top rolls.

An extented rolls can be provided for mounting dies to roll different sections like angle, channel, beam, pipe or flat etc.

Standard Featues

• Both the bottom rolls are driven rolls
• All rolls are mounted on heavy duly ball bearing .Total 4 bearing per roller
• Fully hydraulically operated machine requires less input power compared to electro hydraulic
• Separate digital roll position meter for each side of roll makes it easy to maintain parallelism between top and bottom roll
• Extra heavy central support with bearing to resist point load on roller and for longer roller life
• Hydraulically operated drop end frame for ease of job removal
• A single person can operate the machine while rolling

Optional Featues

• Hardened rolls up to 52-55 RC
• Tilt able top roll for ease of removal 0of duly rolled shells
• Cone bending arrangement between bottom rolls for smaller diameter cone rolling
• Extra heavy cone bending arrangement on frame for bigger diameter cone rolling
• Electrical control panel with moving trolley for all around access to operator
• PLC controls for automatic bending and rolling
• All 3 rolls positively driven for thin material rolling
• Extended shaft for section rolling die mounting for rolling of section like angle, channel, beams, flats, pipes, bar etc.

Approx. Rs 3 Lakh / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION

The machine is most economical model among all plate bending machine and is most useful for small fabrication shop.

Advantages

 

• Specially developed low cost economical manual operated machine with motorised roll rotation, a perfect machine for engineering work shop.
• Since all rolls are mounted in roller bearings the electrical consumption is less by 50% compared to conventional pyramid type machine.
• Small engineering workshop willing to invest less still automate rolling.
• Open type rolling requiring mass production qty.
• This machine can be used where different operations like pre bending, rolling, material straightening ,Conical rolling, section rolling need to be carried out in single machine.

Special Features

The machine frame is built from all tested steel plate material.

This frame is subjected to stress releaving, sand blasting and epoxy primer painted for corrosion free long lasting machine life.

The complete body is machined in cnc machine to achieve built in accuracy.

A tiltable control desk is conveniently located on machine.

 

The main panel start / stop buttons and roll rotation fucntion (Reverse / forward) is provided on the same desk.

A specially desinged & built mechanism allows drop end frame to tilt down in horizontal position without much efforts (one person can perform job). No need to dismantle frame from main body like in conventional machine. The top roll can be tilted to great degree of inclination making it most convenient and ease to remove rolled shells without any difficulty.

The Top roll left side position and right side position are indicated seperatly by two digital meters.

All our machine rolls are mounted in heavy duty roller bearings.

 

Each roller is fitted with two bearing per side (four bearing per roller).

A dual cone bending device can be provided as shown.

The attachment provided between bottom rolls is suitable for narrow cone diameter.

 

The attachment to be fitted on a main frame is suitable for cone having wide angle.

An extra wide 'Y' type adjustable support rolls mounted in bearings provides best support to bottom rolls & eliminate scraches on top rolls.

An extented rolls can be provided for mounting dies to roll different sections like angle, channel, beam, pipe or flat etc.

Standard Featues

 

• Both the bottom rolls are driven rolls
• All rolls are manufactured in alloy steel material
• Separate digital roll position meter for each side of roll makes it easy to maintain parallelism between top and bottom roll
• Manually operated drop end frame tilting for ease of job removal

Optional Featues

• All 3 rolls positively driven for thin material rolling
• Hardened rolls up to 52-55 RC
• Tilt able top roll for ease of removal of duly rolled shells
• Cone bending arrangement between bottom rolls for smaller diameter cone rolling
• Extra heavy cone bending arrangement on frame for bigger diameter cone rolling
• Magnetic base electrical pendant for all around access to operator
• PLC controls for automatic bending and rolling
• Extended shaft for section rolling die mounting for rolling of section like angle, channel, beams, flats, pipes, bar etc.
• Sinking type reference plate for initial reference while feeding the plate inside the machine.
• Feeder table